R44SA SENSOR
The Reacta 44 – R44SA sensor is an integral PIR, daylight regulation and digital dimming sensor for controlling digitally dimmable luminaires.

Introduction
The Reacta 44 – R44SA sensor is an integral PIR, daylight regulation and digital dimming sensor for controlling digitally dimmable luminaires.
Features & Benefits
- Integrally mounted within luminaire.
- Passive infrared PIR occupancy detection.
- Bright out mode.
- Daylight dimming.
- Adjustable parameters via REA AP infrared programmer.
- Occupancy Dimming.
- Adjustable parameters via REA AC infrared programmer.
Application
- Corridors
- Hospitals
- Utility areas
- Industrial areas
Technical Data
- Technology – PIR.
- Area coverage 5m @ 2.4m mounting height.
- Nominal voltage 230v, 50/60Hz.
- 1 Digital ballasts/LED drivers.
- Ambient operating temperature range 0°C to 25°C.
- Ingress protection rating IP20.
- Fascia colour silver.
- Standby Power 0.36W
Adjustable Parameters
- Adjustable parameters via REA AP programmer.
- PIR (presence) – [on/off].
- Bright out mode – [yes/no].
- Daylight dimming – [on/off].
- Daylight dimming level – [10 to 1000 lux. (max.)].
- High time delay – [30sec. to 60min. (continuous)].
- Low light level – [1% to 100%].
- Low time delay – [30sec. to 60min. (continuous)].
- Power-up state – [on/off].
- New lamp ageing – [off, 50hr, 100hr].
- Lux photocell sensor calibration – [lock, 10 to 10000 lux].
- 12 hour auto reset – [yes/no].
- Maximum auto level – [1% to 100%].
Sensor Detection
