R43 SENSOR
The Reacta 43 – R43 sensor is a recessed flush mounted standalone passive infrared sensor with bright out function, presence or absence detection to control fixed output (non dimmable) high frequency luminaires.
Introduction
The Reacta 43 – R43 sensor is a recessed flush mounted standalone passive infrared sensor with bright out function, presence or absence detection to control fixed output (non dimmable) high frequency luminaires. Please note that the REA-R43 controller is required to adjust settings with this sensor.
Features & Benefits
- Flush mounting.
- Passive infrared PIR occupancy detection.
- Timer off delay adjustment via programmer.
- Daylight photocell hold off switching level via programmer.
- Absence detection switched input.
Application
- Classrooms
- Corridors
- Hospitals
- Lobby’s
- Offices
- Receptions
- Meeting rooms
Technical Data
- Area coverage 5m @ 3m mounting height.
- Nominal voltage 230v, 50/60Hz.
- Ingress protection rating IP20.
- Standby power <1w.
- Ambient operating temperature range 0-10°C to +50°C.
- Fascia colour white.
Adjustable Parameters
- Daylight threshold: 2 Lux / 10 Lux / 50 Lux / 100 Lux / 300 Lux / 500 Lux / Disable
- Hold time: 2 seconds / 30 seconds / 1 minute / 5 minutes / 10 minutes / 15 minutes / 20 minutes / 30 minutes
Ordering
Sensor |
|||
|---|---|---|---|
| Code | Description | ||
| R43 | Reacta 43 Sensor, Recessed Flush Mounted Standalone, PIR, Bright Out Function, On/Off Relay | ||
| R43 SURFACE CAN | Surface mounting can for use with R43 recessed sensor | ||
Images
Diagrams
-
R43
